Foundry Networks IRONPOINT 250 Manual do Utilizador descarregar pdf (Página 21)

About the IronPoint 250

Status LEDs

The access point includes four status LED indicators, as described in the following figure and table.

Figure 2-3. Status LEDs

Status LEDs

LED Status Description

Status On Green Indicates that power is being supplied and the system is working

normally.

Flashing Green Indicates -

• the access point is running its self-test

• the access point is loading a software file

On Amber Indicates a CPU or system failure.

Flashing Amber

(Prolonged)

Indicates a system error.

Link On Green Indicates a valid 10/100 Mbps Ethernet cable link.

Flashing Green Indicates that the access point is transmitting or receiving data on

the attached 10/100 Mbps Ethernet LAN. The flashing rate is

proportional to network activity.

Off Indicates no 10/100 Mbps Ethernet cable link.

Radio a On Green Indicates the 802.11a radio is enabled.

Flashing Green Indicates that the access point is transmitting or receiving data

through 802.11a wireless links. The flashing rate is proportional to

network activity.

Off Indicates the 802.11a radio is disabled.

Radio b/g On Green Indicates the 802.11g radio is enabled.

Flashing Green Indicates that the access point is transmitting or receiving data

through 802.11g or 802.11b wireless links. The flashing rate is

proportional to network activity.

Off Indicates the 802.11g radio is disabled.

802.11a

Wireless

Link/Activity

Ethernet

Link/Activity

802.11b/g

Wireless

Link/Activity

Power

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

Sem comentários

Foundry Networks IRONPOINT 250 Manual do Utilizador Página 21